Snatch Blocks / Material Handling - Page 3 - Huge Savings! Save up to 18%

Huge Savings! Up to 18% off on Snatch Blocks (in Material Handling) at KU Building Tech, Page 3 [44]. Top brands include Favorite-trade, Indusco, MCKISSICK, Pro-LifT, Mytee Products, GBGS, Rock Exotica, & BNYZWOT. Hurry! Limited time offers. Offers valid only while supplies last.

Snatch Block with Swivel Hook - Commercial Reliability Hook Snatch Block - Wire Rope Wrecker Roll Back Recovery 3"-6" - Sheave 2 to 6 Tons WLL (2 Tons 3")
By Favorite-trade
In Stock

mpn: SnatchBlockWLL2-8,

4.9 out of 5 stars with 21 reviews
Sheave Size: Varies From 3'' to 6''. Wire Rope: 3/8'' through 1/2''. Working Load Limit: Up to 8 Tons. LOADS ON PULLEY BLOCKS A single sheave block used to change load line direction can be subjected to total loads greatly different from the weight being lifted or pulled. The total load value varies with the angle between the incoming and departing lines to the block. When these lines run parallel (0 degree angle between the incoming and departing lines), load on the block will be 2 times the li

Indusco 16900220 Steel Snatch Block with Swivel Hook, 8 ton Load Capacity, 3/4" Rope, 6" Sheave
By Indusco
In Stock

mpn: 16900220,

4.3 out of 5 stars with 9 reviews
Indusco steel snatch block with swivel hook. Steel shell for wire rope. Semi-circular guard in shell over sheave prevents wire from slipping between shell and sheave. This feature greatly strengthens the plates in the shell. Steel sleeve over center pin gives a bearing surface of large diameter. Sleeve is held tightly between the plates and makes the block extremely rigid. Failure to design and use tackle block systems properly may cause a load to slip or fall - the result could be serious injur

Crosby 4193" Bb Snatch Block 5/16- (109037)
In Stock

mpn: 109037, ean: 0662547090373,

4.5 out of 5 stars with 36 reviews
Crosby McKissick 419 Light Champion Snatch Blocks with Shackle | 3-Inch Sheave Diameter | 2 Ton Working Load Limit | 5/16 - 3/8 Inch Wire Rope Size | 109037Exclusive bolt retaining spring ensures no bolts are lost. Forged steel swivel tees, yokes and shackles. Opening feature permits insertion of rope while block is suspended from gin-pole. Fatigue rated with pressure lube fittings. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load an

3" X 2 ton Plate Sided Tailboard Block for 3/8" Wire Rope
By Pro-LifT
In Stock

mpn: 3468, ean: 0637459719704,

4.6 out of 5 stars with 14 reviews
Tailboard Block - Model No. 4040 3 in. sheave size for 3/8 in. wire rope. W.L.L.: 2 tonsWeight: 2.00 lb.

2 Ton Snatch Block w/Shackle Crane 3/8 Wire Rope Sheave Tow Axle Lift Truck
By Mytee Products
In Stock

mpn: SB3-2-Shackle, ean: 0617503284259,

4.6 out of 5 stars with 52 reviews
Sheave Size: 3''  Wire Rope: 3/8'' Working Load Limit: 2 Tons End Fitting: Shackle Comes With Grease Fittings The snatch block is a pulley system with covered and protected yet removable sides. It is possible to unscrew or remove one side, slip in the winch cable or rope and then re protect the same side to prevent the cable from leaving the groove. It has either a hook or a shackle at it’s tip. Snatch blocks or pulleys are used to change the direction of the pull to a different angle relati

GBGS Stainless Steel M50 Pulley Wheel Roller Lifting, Heavy Duty, 400kg/880lb Load Bearing, 360 Degrees Rotation, Anti-Rust, Corrosion Protection, Work with 13mm/0.5in(Max) Rope (4 Pack)
In Stock
You Save: 18%
4.2 out of 5 stars with 26 reviews
GBGS Stainless Steel M50 Pulley Wheel Roller Lifting, Heavy Duty, 400kg/880lb Load Bearing, 360 Degrees Rotation, Anti-rust, Corrosion Protection, Work with 13mm/0.5in(Max) Rope (4 Pack) Specification: Material: 304 stainless steel Finish: Polishing electrolysis Load bearing: 400kg/881.8lb Ring diameter: 8mm/0.31in Ring rotation angle: 360̊ Pulley diameter: 50mm/1.96in Pulley thickness: 21.5mm/0.85in Steel plate thickness: 3mm/0.11in Product size: 13*5.3*3.3cm/5.1*2.1*1.3in Package size: 14*12*

Omni Rigging-Block 4.5" ASME B30
By Rock Exotica
In Stock

mpn: MHP58,

4.2 out of 5 stars with 44 reviews
The Omni-Block combines a swivel and pulley into one tool, and incorporates a unique sideplate that opens while the pulley is still attached to the anchor. Traditionally, a pulley is connected to a swivel by a carabiner. However, the Omni eliminates the need for the carabiner, reducing length and pieces of equipment in the rigging system. The short length of the Omni is important when used in high-angle, confined space or other space-sensitive rigging environments. The reduced weight of the Omni

BNYZWOT 6 Pack M32 Lifting Single Pulley Roller Loading 551Ibs, 304 Stainless Steel Heavy Duty Single Wheel Swivel Lifting Rope Pulley Block
In Stock

ean: 0793610605061,

4.5 out of 5 stars with 15 reviews
Description This item is manufactured with 304 stainless steel material for durable and long-lasting use. It's rustproof and corrosion-resistant with smooth sliding function. It equips with heavy duty capacity with very practical design and super solid structure. The precise design will ensure its practicability in the work of highly performance. Specification - Size: M32 - Color: Silver - Quantity: 6 pack - Material: 304 Stainless Steel - Safe Loading Capacity: 250kg/551 lbs - Product Name: Si

Viewing Page 3 of 3

Browse Our Catalog