Heating Elements / Furnace Parts & Accessories - Page 3 - Mega Sale! Save up to 26%


Mega Sale! Up to 26% off on Heating Elements (in Furnace Parts & Accessories) at KU Building Tech, Page 3 [55]. Top brands include uxcell, Current Culture, DORATA, Therm-O-Disc, Unknown, BoMiVa, Honeywell, Goss, Nuheat, Improved Ignition®, OEM Replm for Intertherm, & OEM Replm for Coleman. Hurry! Limited time offers. Offers valid only while supplies last.



uxcell 15M 49Ft 0.2x12mm Nichrome Flat Heater Wire for Heating Elements
By uxcell
In Stock
$34.49
$33.80
You Save: 2%

mpn: a16030100ux0482, ean: 0602451276708,

4.7 out of 5 stars with 25 reviews
Nichrome is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.Product Name : Heater W


Current Culture Return Manifold UC
By Current Culture
In Stock
$79.86

mpn: 743167, ean: 0697691623856,

4.5 out of 5 stars with 10 reviews
This item is the return manifold for the current culture under current, double barrel and evolution systems. Just pick your system size! note: for double barrel models, use (2) uc return manifolds for your appropriate sized system. Plant spacing: uc = 18 in plant centers, ucxl = 25 in plant centers, ucxl13 = 30 in plant centers and ucxxl13 = 40 in plant centers.


DORATA - 4 Pcs 560mm Kiln Furnace Heating Elements Coil Heater Wire 2000W AC220V
By DORATA
In Stock
$24.99

mpn: MAURL_3286069748, ean: 0689362856748,

4.4 out of 5 stars with 28 reviews
Product Name : Heating Elements CoilThis is a heating Elements wire coil for use in kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.Please Stretch this Heating Elements Coil before connecting it to power, or it would burn and cause damage.Voltage : 220VPower : 2000 WTotal length: 58cmWire Diameter : 0.8mm/0.03 inch Material : FeCrAlColor: SilverWeight : 179gPackage Con : 4 x Heating Elements Coil100% Brand new and High quality.. Electrical Equipment, Ge


NEW L250 Rollout Switch Manual Reset Gas Flame Heating Furnace Disc Limit +Instruct.
By Therm-O-Disc
In Stock
$29.99

mpn: 36TX16, ean: 0741812669596,

4.7 out of 5 stars with 39 reviews
Universal replacement for a large variety of Gas & Electric Furnaces, Pellet Stove and Air Handlers, substitute a number of high priced replacement parts!!! It will fit: Goodman Janitrol Amana 250 Rollout Limit Switch 10123530 101235-30 Intertherm Nordyne Miller #626463 #626463-0 #626352 Rheem Ruud - York Coleman + many more...L250 Rollout Switch Manual Reset Gas Flame Heating Furnace Disc Limit +Instruct..


Electric Heat Sequencer Control DPST 24 Volt for Q103 24A34-3 1056789 1256504 for Sequence Control
By Unknown
In Stock
$19.41

mpn: PCQ103, ean: 0767501147589,

4.5 out of 5 stars with 58 reviews
Sequencer Part number : PCQ103. 24 Volts, DPST, 1 Timing / 2 Switch, Off 40-110 Seconds, On 1-20 Seconds. Terminal Markings are Equivalent to Competitive Types.. Replacement for Numbers: Carrier HN67QC005, ICP (Heil, Comfortmaker, Tempstar, Arcoair) 1056789, HQ1056789, Diversitech DGS103, Goodman / Amana / Janitrol 1256504 BT1256504, Klixon E017, Mars 33244, 33844, Napco NS103, Supco Q103, White Rodgers 24A34-3. Watsco TDR20, York 525-37322-000.


uxcell 0.8mm 20AWG Heating Resistor Wire Nichrome Resistance Wires for Heating Elements 65.6ft
By uxcell
In Stock
$22.47

mpn: a18091100ux0578,

4.3 out of 5 stars with 19 reviews
Description:Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.Nichrome(Cr2


BoMiVa - 4 Pcs 560mm Kiln Furnace Heating Elements Coil Heater Wire 2000W AC220V
By BoMiVa
In Stock
$24.95

mpn: BETFE_3286069748, ean: 0300748417222,

4.0 out of 5 stars with 7 reviews
Product Name : Heating Elements CoilThis is a heating Elements wire coil for use in kilns and furnaces for pottery, metal casting, heat treating, forging, and many other uses.Please Stretch this Heating Elements Coil before connecting it to power, or it would burn and cause damage.Voltage : 220VPower : 2000 WTotal length: 58cmWire Diameter : 0.8mm/0.03 inch Material : FeCrAlColor: SilverWeight : 179gPackage Con : 4 x Heating Elements Coil100% Brand new and High quality.. Tools, Household Items,


Honeywell Q4100C9054 Silicon Carbide Igniter
By Honeywell
In Stock
$22.20
$16.38
You Save: 26%

mpn: Q4100C9054, ean: 0085267799492,

4.0 out of 5 stars with 12 reviews
Q4100c hot surface igniters are designed to provide a robust field service replacement igniter in gas fired appliances with 120 vac silicon carbide hot surface igniters. the q4100c uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance. q4100c models include the silicon carbide igniter, bracket, screw, and wiring accessories to adapt the igniter to the specific appliance application.This is 120 volt. With 5-1/4 in. Lead lengths. S


Goss FP-540 Outdoor Heating Furnace
By Goss
In Stock
$203.34
$198.61
You Save: 2%

mpn: FP-540, ean: 0662999019205,

4.8 out of 5 stars with 52 reviews
Outdoor propane floor furnace. A well-constructed melting furnace with heavy cast iron flame burner. Goss has been manufacturing and distributing quality products in the USA for over 70 years.Outdoor furnace with on/off needle valve. Used to melt lead, heat water or food. Cast iron and steel construction. Output approximately 43,200 BTUs. Gas usage approximately 2-Pound per hour.


uxcell 0.7mm 21AWG Heating Resistor Wire Nichrome Resistance Wires for Heating Elements 65.6ft
By uxcell
In Stock
$17.99

mpn: a18091100ux0580,

4.5 out of 5 stars with 15 reviews
Description:Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.Nichrome(Cr2


Nuheat 120 V, 60"x36" Standard Mat
By Nuheat
In Stock
$333.10
$299.00
You Save: 10%

mpn: F1509, ean: 0620713000106,

4.3 out of 5 stars with 48 reviews
Nuheat's standard mats (squares and rectangles) are ideal for most room layouts. Nuheat Mats are 1/8 thick, easy to install, energy efficient, and can be controlled using a variety of programmable and non-programmable thermostat options. Our electric floor heating system can use one or a combination of in floor heating mats to deliver under floor heat for the entire room. Nuheat in floor heating mats come in over 60 different standard sizes and are available in both 120 & 240 volt formats.EAS


Gas Furnace Hot Surface Ignitor Improved Ignition Direct Replacement For Carrier Bryant Payne OEM Part LH33ZSA004
By Improved Ignition®
In Stock
$39.47

mpn: II09, ean: 0683405356417,

4.3 out of 5 stars with 37 reviews
This ignitor is the ''wide'' style used on many Carrier, Bryant, Payne, and Day & Night gas furnaces. The ceramic block is 2'' wide, 15/16'' deep, and 5/8'' thick. The heating element portion of the ignitor is 2-1/4'' long. Ceramic block and electrical connector type can be seen in product pictures. This ignitor is the replacement for Carrier Bryant Payne Day & Night part numbers LH33ZS001, LH33ZS002, LH33ZS003, and LH33ZS004.Replacement for many Carrier, Bryant and Payne ignitors. LH33ZS001, LH


Nuheat 120 V, 84"x36" Standard Mat
By Nuheat
In Stock
$294.00
$293.99

mpn: F2109, ean: 0620713000304,

4.6 out of 5 stars with 35 reviews
Nuheat's standard mats (squares and rectangles) are ideal for most room layouts. Nuheat Mats are 1/8 thick, easy to install, energy efficient, and can be controlled using a variety of programmable and non-programmable thermostat options. Our electric floor heating system can use one or a combination of in floor heating mats to deliver under floor heat for the entire room. Nuheat in floor heating mats come in over 60 different standard sizes and are available in both 120 & 240 volt formats.EAS


Honeywell Q4100C9046 Silicon Carbide Igniter
By Honeywell
In Stock
$17.20

mpn: Q4100C9046, ean: 0085267963091,

4.2 out of 5 stars with 10 reviews
Q4100c hot surface igniters are designed to provide a robust field service replacement igniter in gas fired appliances with 120 vac silicon carbide hot surface igniters. the q4100c uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance. q4100c models include the silicon carbide igniter, bracket, screw, and wiring accessories to adapt the igniter to the specific appliance application.This is 120 volt. 19-1/8 in. Lead lengths. Silic


Honeywell Q4100C9042 Silicon Carbide Igniter
By Honeywell
In Stock
$22.12

mpn: Q4100C9042, ean: 0085267505673,

4.8 out of 5 stars with 8 reviews
Q4100c hot surface igniters are designed to provide a robust field service replacement igniter in gas fired appliances with 120 vac silicon carbide hot surface igniters. the q4100c uses a 120 volt silicon carbide igniter design with long life and high resistance to damage or burn out in the appliance. q4100c models include the silicon carbide igniter, bracket, screw, and wiring accessories to adapt the igniter to the specific appliance application.This is 120 volt. With 5-1/2 in. Lead lengths. S


902821 - Intertherm OEM Replacement Electric Furnace Heating Element
By OEM Replm for Intertherm
In Stock
$131.90
$122.99
You Save: 7%

mpn: Replaces Intertherm # 902821,

4.8 out of 5 stars with 24 reviews
This listing is for a brand new 10kw heating element for a Nordyne / Intertherm / Miller Electric Furnace, part # 902821. These elements a brand new from the factory. These elements will fit several different Nordyne/Intertherm/Miller Electirc Furnace including model #'s E3EB-010H, E3EB-015H, E3EB-020H, E2EB-010HA, E2EB-015HA, E2EB-020HA, E2EH-010HA, E2EH-015HA, E2EH-020HA, E1EB-010HA, E1EB-015HA, E1EB-020HA, E1EH-010HA, E1EH-015HA, E1EH-020HA, FEHA-015HA, FEHA-020HA, FEHB-015HA, FEHB-020HA, FEB


5000-219-501 - Coleman OEM Replacement Electric Furnace Heating Element
By OEM Replm for Coleman
In Stock
$100.00

mpn: Replaces Coleman # 5000-219-501,

4.5 out of 5 stars with 8 reviews
This is a Brand New OEM Furnace Heating ElementThis is a Brand New OEM Furnace Heating Element. Top Qualty OEM Replacement Part!.


902818 - Intertherm OEM Replacement Electric Furnace Heating Element
By OEM Replm for Intertherm
In Stock
$74.64

mpn: Replaces Intertherm # 902818,

4.6 out of 5 stars with 38 reviews
This listing is for a brand new 5kw heating element for a Nordyne / Intertherm / Miller Electric Furnace, part # 902818. These elements are brand new from the factory. These elements will fit several different Nordyne / Intertherm / Miller Electric Furnace including model #'s E4EB-015H, E3EB-015H, E2EB-015HA, E2EH-015HA, E1EB-015HA, E1EH-015HA, FEHA-015HA, FEHB-015HA, FEBB-015HA, FEHY-015HA, CME-015HA-03. This part replaces part #'s 239823, 2398230, 432731, 4327310, 491217, 4912170, 631690, 6316


3500-410 - Coleman OEM Replacement Electric Furnace Heating Element
By OEM Replm for Coleman
In Stock
$110.82

mpn: CECOMINOD081460,

4.4 out of 5 stars with 24 reviews
This is a Brand New OEM Furnace Heating ElementThis is a Brand New OEM Furnace Heating Element. Top Qualty OEM Replacement Part!.


5000-219-503 - Coleman OEM Replacement Electric Furnace Heating Element
By OEM Replm for Coleman
In Stock
$91.13

mpn: CECOMINOD082694,

4.9 out of 5 stars with 39 reviews
This is a Brand New OEM Furnace Heating ElementThis is a Brand New OEM Furnace Heating Element. Top Qualty OEM Replacement Part!.



Viewing Page 3 of 4



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - kubuildingtech.org. All Rights Reserved.